Transtector

Transtector ALPU-TSU PoE Surge Arrestor for Proxim Tsunami Multipoint 20/60, QuickBridge 20, 60 and QuickBridge II

Part Number: 1101-656

List Price: $257.99

(Request quote for discounted pricing)

In Stock: 12 Available

Quantity

- +


The ALPU-TSU surge suppressor is a high-speed, high-current solid state device designed to protect (1) Ethernet CAT-5 line and (1) 48 VDC lines. The ALPU-TSU uses only silicon avalanche suppression diodes (SASD). It connects to the service in a pass through configuration. The input and output connections are made at two “screw type” terminal blocks. Both the input and output harnesses pass into the suppressor housing via waterproof strain reliefs. The molded plastic enclosure is also waterproof, and features integrated mounting holes that are concealed by the cover and integrated gasket.


PERFORMANCE REQUIREMENTS:




























































































Electrical Service


Ethernet


Transfer rate

CAT-5 10/100Mb/s

Configuration

2 pair

Input Connection

Screw-Term Block (22-16 AWG)

Protection Modes

Line to Line, Line to Ground

Maximum Continuous Operating Voltage

13 VDC

48 VDC


Service Voltage

48 VDC

Configuration

4 wire

Input Connection

Screw-Term. Block (22-16 AWG)

Protection Modes

Line to Line, Line to Ground

Maximum Continuous Operating Voltage

60 VDC

Electrical Performance


Ethernet


Testing


Ipk(Tested to IEEE 10/1000us Long Wave)


200A peak


Ipk(Tested to IEEE 8/20us Combination Wave)


2500A peak


Response Time (Max)

5 nanoseconds

 Standby Power (Max)

< 0.5 Watt

Peak Power

5000 Watts

48 VDC


Testing

 

Ipk(Tested to IEEE 10/1000us Long Wave)

200A peak

Ipk(Tested to IEEE 8/20us Combination Wave)

2500A peak

Response Time (Max)

5 nanoseconds

Standby Power (Max)

< 0.5 Watt

Peak Power

20,000 Watts

ENVIRONMENTAL


 Operating Temperature

-40°C to +80°C

Storage Temperature

-40°C to +80°C

Relative Humidity

99% (non-condensing)

MECHANICAL/INSTALLATION


Enclosure dimensions: The suppressor is housed in a molded plastic enclosure that is 6.13 in long, 4.5 in wide and 2.5 in tall. The enclosure mounts with #6 hardware.


Mounting data: See diagram below.



Wiring data: The ALPU-TSU is designed to accept (2) multi-conductor cables with outside diameter ranging from ј” to 3/8”.